Here are some pictures of the new sensor and some mountings I did on Leaf River, Trophycam and Scoutguard.

Please refer to the XtendIR-B review for a fuill write up on this.
http://www.chasingame.com/index.php?id=132#newsensor

I use Gear Wraps from Academy sports as a band around the camera and double sided foam adhesive for a semi-permanent mount:








Black Flash conversions:

_________________
Thanks,
Anthony
Trail Camera Review: http://www.chasingame.com
Our store front: http://shop.chasingame.com
Scouting Assistant Software: http://www.scoutingassistant.com

Disclaimer: For those who do not understand any of my posts, I have good intentions so plz do not take it the wrong way. If in doubt, just pm me. Seems I am considered "unpolished" when it comes to "talking nice & politely"

I like that right angle design better.

From what I understand, HCO will send you a replacement cable if want the new one for free + Shipping.

_________________
Thanks,
Anthony
Trail Camera Review: http://www.chasingame.com
Our store front: http://shop.chasingame.com
Scouting Assistant Software: http://www.scoutingassistant.com

Disclaimer: For those who do not understand any of my posts, I have good intentions so plz do not take it the wrong way. If in doubt, just pm me. Seems I am considered "unpolished" when it comes to "talking nice & politely"

Just received a extendIR from Custom1. Chuck included adhesive velcro for attaching the sensor to the array. I just used a hole punch and trimmed it to fit the the sensor. I think this is going to be a real good way of securing the sensor.

_________________
It ain't much of a story without pics!

Has anyone tried double stick tape? I am using my Xtendir's on Spypoint IR-A's and IR-6's and it seems to be really critical to get the sensor just right.

_________________
(1) Bushnell 456
(3) Uway Xtendir-B's
(2) Covert Red 40's
(2) Bushnell 476's



America, Born 1776-Died Election Day 2008

I sed that 3m product that is a double sided tape. I used it on a SG550 and it lasted 6 months in the field and is still stuck on there.

_________________
Thanks,
Anthony
Trail Camera Review: http://www.chasingame.com
Our store front: http://shop.chasingame.com
Scouting Assistant Software: http://www.scoutingassistant.com

Disclaimer: For those who do not understand any of my posts, I have good intentions so plz do not take it the wrong way. If in doubt, just pm me. Seems I am considered "unpolished" when it comes to "talking nice & politely"

Camo Gear Wrapz™
I couldn't find them on Academy Sports' site, no matter how I spelled the name. Alliance Rubber Co., which I believe is the manufacturer, apparently sells them direct: <http://alliance-rubber.com/products/gearwrapzstrapz/camogearwrapz.html>. I also saw them listed at cableorganizer.com, but just the assortment of five each 4", 7", and 10" Wrapz. <http://cableorganizer.com/camo-gear-wrapz>

Anyone who's used/using them to hold XtendIR sensors on cams, are the 4" ones sufficient, since they stretch?

You may want to use this stuff. I bought some but have not tried it yet.

viewtopic.php?f=34&t=19525&start=0&p=137400&view=show#p137400

_________________
(1) Bushnell 456
(3) Uway Xtendir-B's
(2) Covert Red 40's
(2) Bushnell 476's



America, Born 1776-Died Election Day 2008