I have an NT50B that I would like to experiment with. After a couple years of returns/replacements I have a camera that does everything I want plus some! It takes awesome pictures and video, has a very fast trigger, and misses nothing. My problem is that I get literally thousands of false triggers, day and night. It does not seem to matter if it is hot or cold, windy or calm or dark or full sun. It is not a runaway issue as trigger times are quite random. Is there any way of "dumbing down" my sensor? I have considered covering fresnel lens with semi transparent tape or similar to try and avoid some triggers. Does anyone have any suggestions, ideas, or info that might help decrease my trigger count?
Thanks
Murray

_________________
2009 Bushnell Trophy
2010 Uway NT50B
2011 Bushnell 119466C
2012 Bushnell 119466C
HC 500 Reconyx
2012 Covert Reveal

The very first shipment that came out had miss-matched sensors and would trigger continually thus called run-a-ways. These had solid green cases. Owners could exchange then for revised units at no cost and the new ones came with a camo case.
These were ultra senative too but were not run-a-ways. wind would set them off.
Does that help?
Otherwise you can contact Uway to see if they have a firmware update for your unit.

_________________
(1) 06 Cudde No Flash red
(1) 09 Bushnell Trophy Cam red
(1) 08 WGI S-1.3 white
(2) 10-11 Uway NT 50 B -Invisible Flash BF
(1) 11Truth 60 Black Out BF
(1) 11-M80 red
(1) 12-M80 BLX BF
(1) 12-Primos BlackOut CR BF
(1) 12 WGI Red 4 4NE
990I