Coincidently, I was just trying to test the trigger speed on my 2010 BTC, and documenting the process.
Here's a link to the best on-line stopwatch:http://stopwatch.onlineclock.net/
Be sure to click on "extra large" in the upper left corner of the screen.
I would post my trigger time results, but all 15 of my test pics looked like this:
In all fairness, it's very possible that my test pics are "whited out" due to a glare from my netbook screen, so I'll reposition the netbook screen and retest.
Now you see some of the issue we run into
What is going on here is that there is not enough light in the room for the camera to switch to color so the IR array is flashing creating the white out. Try putting more light like a lamp nearby (shine onto the face of the camera) to push more light into the camera and try again. Keep in mind the day and night times are different.
To test night time keep your current set up and put black tape over the array.
Your problem could also be that you use USPS box when you should have use UPS
AnthonyTrail Camera Review
: http://www.chasingame.comOur store front
: http://shop.chasingame.comScouting Assistant Software:
Disclaimer: For those who do not understand any of my posts, I have good intentions so plz do not take it the wrong way. If in doubt, just pm me. Seems I am considered "unpolished" when it comes to "talking nice & politely"