ready to go.....thanks to JDH

bullshead bully · **Posted:** Sat Mar 10, 2012 8:40 am

p41...ss11...1020 case
going to start building today.

CAM-O · **Posted:** Sat Mar 10, 2012 8:52 am

Sweet deal right there,

your going to love that build, P41 takes great pics.
Hope to see your pics soon. Good luck on the build.

Rick!

Bluesman · **Posted:** Sat Mar 10, 2012 8:52 am

Good luck on your build.It gives me chills just thinking of putting it together. :mrgreen:

danno1400 · **Posted:** Sat Mar 10, 2012 8:53 am

You will love it. I have used many of the JDH kits and everything is very precise and easy to assemble, he does excellent work. Danno

bullshead bully · **Posted:** Sat Mar 10, 2012 10:36 am

thanks guys.....hoping to have it done by november.
i'm no builder............... :lol:

tbone303 · **Posted:** Sat Mar 10, 2012 10:58 am

you are at the right place here if ever you need help. Good luck.

bullshead bully · **Posted:** Sat Mar 10, 2012 2:22 pm

ok, i already need help. what wires go into the ss11 board ?

power wire in power or power common terminal

common wire in shutter common or power common

shutter wire in shutter or shutter common terminal

i must have something wrong. when i tested, the light is blinking behind the fresnel
at every movement but no pic's going to cam.

johnnydeerhunter · **Posted:** Sat Mar 10, 2012 2:34 pm

Shutter in the shutter location

bullshead bully · **Posted:** Sat Mar 10, 2012 2:38 pm

here is what i have hooked up:

power in power terminal
common in power common terminal
shutter in shutter terminal

is this correct?

johnnydeerhunter · **Posted:** Sat Mar 10, 2012 2:42 pm

That's the walktest light, the board needs to see no movement for about a minute for it to go out of walktest

bullshead bully · **Posted:** Sat Mar 10, 2012 2:43 pm

thanks john...... :oops:

johnnydeerhunter · **Posted:** Sat Mar 10, 2012 2:55 pm

No prob, trying to post from my phone at Luke's basketball game.

bullshead bully · **Posted:** Sat Mar 10, 2012 7:44 pm

still nothing....turn on sensor, flashes 4 or 5 times.
about one minute later it flashes about 10 times quickly.
i'm guessing eveything is supposed to be in sync now.
wait a few minutes, walk in front and nothing. not sensing to cam.
any suggestions ?

johnnydeerhunter · **Posted:** Sat Mar 10, 2012 8:27 pm

try turning up the white pot dial, I usually leave it in the middle position.

does walk test work after you get the first few red flashes and before you get the 10 quick blinks?

bullshead bully · **Posted:** Sat Mar 10, 2012 8:49 pm

will try both now...

Chasingame.com discussion forum

ready to go.....thanks to JDH

Who is online

Login Register	FAQ Search
	It is currently Sun May 19, 2013 1:47 pm