Trail Camera Discussion of Manufactured Cameras.
By doughboysigep
#359168
I have issues with my battery contacts getting rusty/corroded. It happens on various cameras, and not all the time. Is there a spray I can use to help minimize/eliminate that? Spray down at end of the season and maybe before they go back out? A dialectic grease, but in a spray(?). Any good way to clean rusty/corroded contacts???
User avatar
By Woody S
#359169
Not sure how to prevent corrosion on the contacts, but if you get corrosion here's how to clean the contacts -- Use an old toothbrush dipped in denatured alcohol and scrub the contacts; it may take a couple of tries if the corrosion is bad. In a pinch I've even used unscented alcohol-based hand sanitizer and it also worked.
By Tinhorn
#359170
get some "Anti-Oxidant Compound" (a black solve for aluminum electrical wire at Lowes or whatever) and put on the Batts and the connections using a Q-Tip. No more problems

you know how sometimes you have to bump a flashlight when it goes off ? put some on it's too and ...

My LiPo cells taken from an old DeWalt drill have […]

Hyperfire 2 pics

Thanks a lot! I've been wondering how the images[…]

I check with dad and his digital thermometer he ha[…]

Second Big Buck. Part 2

That’s a good one!