Use this forum to discuss modifications to cameras for retrofitting external batteries, solar panels, and case mods not related to camera security.
#69853
Hi folks,

Is it possible to add a better flash to my Bushnell trail sentry? Model number 11-9200. I am happy it takes a decent photo in the daytime, it will also do the same at night if it had a good flash. I tested it out tonight and the flash was extremely poor. At 7 paces I could barely see myself and I'm 6'3" !!!!!!

What, if any, are my options? Does Bushnell offer a flash upgrade for it? Has some genius here figured out a DIY solution? I'm really stuck and need help on this please.

All the best,

John

Edited to add some photos,

Daytime

Image

Night time, you can just make out my torch beam above the end of the slide.

Image

Night again, except I rigged up one of my hunting lights to illuminate the area, if I use a light I would need a much much better flood, but how to synchronise that with the cameras actions.........

Image
#69903
Might check this out. Most cams like these are throw-away when they develop a problem.
viewtopic.php?f=12&t=3385
#69927
Might check this out. Most cams like these are throw-away when they develop a problem.
viewtopic.php?f=12&t=3385
Interesting :!: Don't know how I missed that post, may look into it myself :D

Here is the link to ritz camera and the 2 different flash units.

http://www.ritzcamera.com/webapp/wcs/st ... &x=27&y=13
#69936
It was kinda buried away on page 2.
I remember it because my WD2 flash suddenly got weak and I was trying different
things when PN posted about it.

this one is 698 to 2700

I was wanting to know how does the Hyperfire 2 c[…]

Camera color

:mrgreen:

coopers hawk

looking for turkey left overs